Caring for your meter

Simple maintenance

The meter should be cleaned only with a soft cloth, very slightly moistened.
Rub all surfaces gently when cleaning, particularly around the display screen.
Never use any type of abrasive scouring powder, or any solvent cleaner.
Never use the meter in conditions which are excessively, damp, hot or cold.
Only use the charger that comes with the meter. Using any other will invalidate any warranty.
Use the protective cover to cushion impact damage.
Never use excessive force when coupling/uncoupling the removeable 'F' connector.
Use a push-fit 'F' connector to reduce wear on the removeable connector.
Never attempt to remove the circuit board case cover. Doing so will invalidate any warranty.
Take care with battery polarity when fitting a replacement battery.
Email for support if you have problems; usually, they are easily solved. Obviously, no hardware diagnosis can be done via Email or telephone.

Many of the documents on this site use Adobe's Acrobat® Reader.